SG177
Standard Embraer Tripod Jack Set
The D/DT -Series has been engineered and developed based on our 50 years experience. HYDRO fully understands the operators‘ requirements around the world. The consistent modularity allows it to be configured according to customer specific requirements. Various configuration options, from the basic to the high-end versions, are available in combination with central Electronic Jacking And Levelling (EJAL) control system for safe operation. The D/DT tripod-jack covers all of the most common regional and wide body aircraft.
Technische Spezifikation
| D01066 Tail Jack | D02538 Wing Jack | |
| Capacity: | 10t / 11 tons | 25t / 27.5 tons |
| Min. height: | 1860 mm / 73.2 inches | 1610 mm / 63.4 inches |
| Hydr. lift: | 1390 mm / 54.7 inches | 1250 mm / 49.2 inches |
| Screw ext.: | 300 mm / 11.8 inches | 250 mm / 9.8 inches |
| Max. height: | 3550 mm / 139.7 inches | 3110 mm / 122.4 inches |
Anwendungen
|
Embraer 170/175 Embraer 190/195 Embraer E2 |
Zubehör
Rain cover
Eigenschaften
The Tripod-Jack Set consists of the following tripod jacks:
- 2x D02538K2D1B01A0
- 1x D01066K2D1B01A0
Technical description of the Tripod-jacks:
- Tripod structure
- Hand pump with high- and low-pressure unit
- Overload relief valve for protection against overload
- Double scale indicator, e.g. bar/psi, kN/bar, t/bar
- Manually operated safety lock nut against unintended pressure relief
- Bubble level indicator for vertical alignment verification
- Height-adjustable ground plates
- Spring-loaded castors with locking mechanism
- Hard-chromium-plated cylinder tube for long and trouble free service life
- Secondary cylinder seal for protection against contaminants and to prolong life of primary seal
- Low-friction seal for uniform piston return
- Skydrol-resistant paint and galvanized plating for corrosion protection
- Movable tow-bars
- Ladder with platform or pedestal (according to jack height)
- Rain hat
- Interface for HYDRO proof load equipment
- Factory proof load with 150 %
Benefits
- High Quality made in Germany
- Airbus validated
- Long life-cycle
- Robust and proven design
- Secondary cylinder seal for protection against contaminants and to prolong life of primary seal
- At least 10 years spare part availability
- On-site service
