RAT Safety Interface Kit
Developed to protect aircraft components from damage during RAT ground test. This damage could occur when the gasket (drive shaft seal) of the RAT ground check motor fails.
The RAT Safety Interface Kit can be used in conjunction with all Airbus approved RAT Ground Check Motors.
|Medium:||SKYDROL 500-B4, SKYDROL 5 and SKYDROL LD-4
HYJET IV-4A and HYJET V
|Dimensions and weight of the transport case:||Length: approx. 450mm (1.5ft)
Width: approx. 280mm (0.9ft)
Height: approx. 120mm (0.4ft)
Weight: approx. 3kg (6.6lb)
Ambient temperature: -20 to +50°C (-4 to +122°F)
Relative humidity: 50% at 40°C (104°F) at low temperatures higher relative humidities are permitted (e.g. 90% at 20°C (68°F))
|Airbus A320 (from S/N 1050)|
|Airbus A330-200/ 300|
|Airbus A340-200/ 300/ 500/ 600|
Scope of delivery:
|1||RAT safety interface adapter consists of:
|1||substitute - locking spring|
- Airbus approved, Certificate-number: D29057
- Intermediate flange suitable for every RAT Ground Check Motor product
- Comes with detailed instructions
- Scope of delivery includes rugged transport case
The RAT Safety Interface Kit can be used in conjunction with all Airbus approved RAT Ground Check Motors (Certificate-No: D 29057).