IM2FSAL

LOOP RESISTANCE TESTER

This tool is used to perform Loop Impedance Tests on aircraft wiring. The package includes all equipment required to perform a measurement successfully.



Technische Spezifikation

IM2FSAL1

IM2FSAL2

Set with:

  • Supply clamp >IMZ6<
  • Current measurement clamp >SMZ6<

Set with combined:

Impedance measurement clamp >IMZ7<

 

Note:
For operation at least one combined measurement clamp or two single measurement clamps are required. The measurement clamps are delivered in labelled cable bags.

  • For measurement both one supply and one current measuring clamps are required
  • Apt for use on cables and metal rails of up to approx. 20 mm diameter
  • Spring loaded to closed (operating) position
  • Modified split standard clamps Fluke i200
  • Integrated “Measure” button on supply clamps
  • Both clamps have arrows showing the current direction
  • Symmetric design
  • Apt for use on cables in a confined area of up to approx. 26 mm diameter
  • Spring loaded to closed (operating) position
  • Combined supply and current measurement clamps
  • Symmetric windings for high repeatability
  • “Measure” button

TECHNICAL DATA:

  • Frequency: for test equipment with 1 kHz
  • Resistance range: 400 mΩ
  • UUT diameter: max. 20 mm
  • Accuracy: 5% o.m.v. but not less than 2 mΩ
  • Repeatability of UUT variations position in clamp opening ± 3% of full scale ± 1 mΩ
  • Jaws opening: approx. 21 mm
  • Weight: approx. 700 g
  • Cable length: 3 m
  • Overall dimension (without cable): Width approx. 50 mm, Depth approx. 30 mm, Height approx. 135 mm

TECHNICAL DATA:

  • Frequency: for test equipment with 1 kHz
  • Resistance range: 400 mΩ
  • UUT diameter: max. 26 mm
  • Accuracy: ± 5% o.m.v. but not less than 2 mΩ
  • Repeatability of UUT variations position in clamp opening ±2% of full scale ± 0.5 mΩ
  • Jaws opening: approx. 31 mm
  • Weight: approx. 500 g
  • Cable length: 3 m
  • Overall dimension (without cable): Width approx. 58 mm,Depth approx. 31 mm, Height approx. 120 mm

 

General Technical Data:

Power operation:

1/N/PE AC 50/60 Hz

100 - 240 V

Battery: 14.4 V Li-lon
Charging time: 6 hours
Measurement range up to: 400 mW
Data storage: 90 measured values
Max. resolution: 0.1 mW
Output voltage: max 70 V
Output current: max 1A
Meas. frequency: 1 kHz ± 10 Hz
Accuracy:

depends on clamps

Dimensions: approx 25 x 28 x 16 cm
Weight of Equipment: approx 5 kg

 

Anwendungen

Airbus A318 Airbus A330 CEO & NEO Airbus A380
Airbus A319 CEO & NEO Airbus A340 all  
Airbus A320 CEO & NEO    
Airbus A321 CEO & NEO    

 

Zubehör

Standard scope of delivery:

  • Self test UUT
    • L1673-20A 200 mΩ
    • L1673-6A 10 mΩ
  • Measurement cable set “S307073” with two banana plugs and test prods for Search Mode
  • Power-supply-unit “S1311202” incl. power cable for charging
  • Battery “AXCOM”
  • Shoulder strap “1472”

 

Additional accessories:

 

Transport case “EXPLORER”

Description: Very robust, provided with transport rollers lined with foam storage
Compartment for: - Loop Resistance Tester >IM2FSM2<
- Charger
- 1 battery
- 3 different clamps
Dimensions: approx 60 x 45 x 33 cm
Weight: approx 12.5 kg

 

 

Charger for battery incl. Power Cable
Manufacturer: SWIT
Model: SC-302S
Input: AC 100 - 240 V; 50/60 Hz
Output: DC 14 - 20 V; 1.9 A

 

Eigenschaften

  • Full equipment included to perform a measurement
  • Very large, easy to read display
  • Battery powered, rechargeable in situ or removed
  • Galvanically isolate interface for remote control or data exchange
  • Automatic residual current compensation
  • Range is switched automatically
  • Search mode for rapid location of faulty connections
  • Including self test unit for function control of the testequipment and the measuring clamps
  • Equivalent Airbus P/N TS11194

Optionen

Optional measurement clamp set
Supply Clamp >IMZ5<
Current measurement clamp >SMZ5[lt"

 

  • An IMZ5 Supply Clamp and a SMZ5 Current Measurement Clamp are required for testing
  • Apt for use on cables and metal rails of up to approx. 55mm diameter
  • Spring loaded to closed (operating) position
  • Modified Split Standard Clamps Fluke i800
  • Integrated “Measure” button on the Supply Clamp
  • Both clamps have arrows showing the current direction

 

TECHNICAL DATA

Frequency:

for test equipment with 1 or 2 kHz

Resistance range:

400 mΩ

UUT diameter:

max. 55mm

Accuracy:

± 5% o.m.v. but not less than 2 mΩ

Repeatability of UUT variations position in clamp opening

± 3% of full scale ± 1 mΩ

Jaws opening:

approx. 55 mm

Weight:

approx. 1.6 kg

Cable length:

3 m

Overall dimension (without cable):

  • Width: approx. 106 mm

  • Depth: approx. 40 mm

  • Height: approx. 230 mm

 

Benefits

  • Tool/ Equipment Bulletin for Airbus A320family (all)
  • Tool/ Equipment Bulletin for Airbus A330/340 (all)
  • Tool/ Equipment Bulletin for Airbus 380
  • All equipment included to perform a measurement successfully

 

Hydro Weltweit
  • Service Center Außendienst

    Hydro AMERIKA

    Toronto, ON

  • Außendienst

    Hydro AMERIKA

    Philadelphia, PA

  • Service Center Standort

    Hydro AMERIKA

    Kent, WA

  • Außendienst

    Hydro AMERIKA

    Los Angeles, CA

  • Außendienst

    Hydro AMERIKA

    Miami, FL

  • Service Center

    Hydro AMERIKA

    Washington D.C.

  • Service Center Standort

    Hydro UK

    Castle Donington

  • Außendienst

    Hydro Spanien

    Madrid

  • Service Center Standort

    Hydro Frankreich

    Toulouse

  • Standort

    Hydro Deutschland

    Biberach


    Firmenzentrale HYDRO Gruppe

    Service Center

    Hydro Deutschland

    Haslach

  • Service Center Standort

    Hydro VAE

    Dubai

  • Service Center

    Hydro Malta

    Paola

  • Service Center

    Hydro Deutschland

    Hamburg

  • Standort

    Hydro China

    Peking

  • Service Center

    Hydro China

    Tianjin

  • Standort Service Center

    Hydro Singapur

    Singapur

  • Service Center

    Hydro Japan

    Tokyo

Kontakt

Wir erwarten Sie.
In 120 Ländern der Welt.

Sie haben Fragen zu unseren Produkten? Sprechen Sie uns an, Ihr Area Sales Manager für Ihre Region hilft Ihnen gerne weiter.