IM2FSAL
LOOP RESISTANCE TESTER
This tool is used to perform Loop Impedance Tests on aircraft wiring. The package includes all equipment required to perform a measurement successfully.
Technische Spezifikation
| IM2FSAL1 |
IM2FSAL2 |
|
Set with:
|
Set with combined: Impedance measurement clamp >IMZ7<
Note: |
|
|
|
TECHNICAL DATA:
|
TECHNICAL DATA:
|
General Technical Data:
| Power operation: |
1/N/PE AC 50/60 Hz 100 - 240 V |
| Battery: | 14.4 V Li-lon |
| Charging time: | 6 hours |
| Measurement range up to: | 400 mW |
| Data storage: | 90 measured values |
| Max. resolution: | 0.1 mW |
| Output voltage: | max 70 V |
| Output current: | max 1A |
| Meas. frequency: | 1 kHz ± 10 Hz |
| Accuracy: |
depends on clamps |
| Dimensions: | approx 25 x 28 x 16 cm |
| Weight of Equipment: | approx 5 kg |
Anwendungen
|
A320-All A330-All A340-All A380-All |
Zubehör
Standard scope of delivery:
- Self test UUT
- L1673-20A 200 mΩ
- L1673-6A 10 mΩ
- Measurement cable set “S307073” with two banana plugs and test prods for Search Mode
- Power-supply-unit “S1311202” incl. power cable for charging
- Battery “AXCOM”
- Shoulder strap “1472”
Additional accessories:
|
Transport case “EXPLORER” |
|
| Description: | Very robust, provided with transport rollers lined with foam storage |
| Compartment for: | - Loop Resistance Tester >IM2FSM2< - Charger - 1 battery - 3 different clamps |
| Dimensions: | approx 60 x 45 x 33 cm |
| Weight: | approx 12.5 kg |
| Charger for battery incl. Power Cable | |
| Manufacturer: | SWIT |
| Model: | SC-302S |
| Input: | AC 100 - 240 V; 50/60 Hz |
| Output: | DC 14 - 20 V; 1.9 A |
Eigenschaften
- Full equipment included to perform a measurement
- Very large, easy to read display
- Battery powered, rechargeable in situ or removed
- Galvanically isolate interface for remote control or data exchange
- Automatic residual current compensation
- Range is switched automatically
- Search mode for rapid location of faulty connections
- Including self test unit for function control of the testequipment and the measuring clamps
-
Equivalent Airbus P/N TS11194
Optionen
| Optional measurement clamp set |
| Supply Clamp >IMZ5< |
| Current measurement clamp >SMZ5[lt" |
- An IMZ5 Supply Clamp and a SMZ5 Current Measurement Clamp are required for testing
- Apt for use on cables and metal rails of up to approx. 55mm diameter
- Spring loaded to closed (operating) position
- Modified Split Standard Clamps Fluke i800
- Integrated “Measure” button on the Supply Clamp
- Both clamps have arrows showing the current direction
TECHNICAL DATA
|
Frequency: |
for test equipment with 1 or 2 kHz |
|
Resistance range: |
400 mΩ |
|
UUT diameter: |
max. 55mm |
|
Accuracy: |
± 5% o.m.v. but not less than 2 mΩ |
|
Repeatability of UUT variations position in clamp opening |
± 3% of full scale ± 1 mΩ |
|
Jaws opening: |
approx. 55 mm |
|
Weight: |
approx. 1.6 kg |
|
Cable length: |
3 m |
|
Overall dimension (without cable): |
|
Benefits
- Tool/ Equipment Bulletin for Airbus A320family (all)
- Tool/ Equipment Bulletin for Airbus A330/340 (all)
- Tool/ Equipment Bulletin for Airbus 380
- All equipment included to perform a measurement successfully
